Compartible Systems Corporation RISC 2600i Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 7 of 10
as packet voice/data connections to a PBX or the PSTN
(packet voice requires the use of the high density voice
trunk network module). Unlike Old World multiboxvoice
and data components, when used in a Cisco 2600 or 3600,
the T1/E1 Multiflex VWICs deliver a single-box voice and
data platform providing a graceful migration from data
only, to channelized voice and data, to packet voice and
data.
Figure 3 Dual-Port Multiflex T1 VWIC with Drop and Insert
The dual-port serial WAN Interface Cards featureCisco’s
new, compact, high-density Smart Serial connector to
support a wide variety of electrical interfaces when used
with the appropriate transition cables. Ports on each card
can be configured individually to support a variety of
synchronous or asynchronous protocols.
Figure 4 Dual-Port High-Speed Serial WAN Interface
Card
(up to 8 Mbps/card)
Figure 5 Dual-Port Async/Sync Serial WAN Interface
Card
(up to 128 Kbps/port)
With two WAN Interface Card slots per chassis, the
Cisco 2600 Series supports the WAN Interface Cards
in Table 4.
Table 4 Multiflex Voice/WAN and WICs for Cisco 2600
Series
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2T
H11496
Serial ports
CONN LEDs
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
H11497
Serial ports
CONN LEDs
Module Description
VWIC-1MFT-T1
1
1. Requires Cisco IOS 12.0(5)XK or later.
One-port T1/Fractional T1 Multiflex
Trunk with CSU/DSU
VWIC-2MFT-T1
1
Dual-port T1/Fractional T1 Multiflex
Trunk with CSU/DSU
VWIC-2MFT-T1-D
I1
Dual-port T1/Fractional T1 Multiflex
Trunk with CSU/DSU and Drop &
Insert
VWIC-1MFT-E1
1
One-port E1/Fractional E1 Multiflex
Trunk with DSU
VWIC-2MFT-E1
1
Dual-port E1/Fractional E1 Multiflex
Trunk with DSU
VWIC-2MFT-E1-DI
1
Dual-port E1/Fractional E1 Multiflex
Trunk with DSU and Drop & Insert
VWIC-1MFT-G703
2
2. Requires Cisco IOS 12.1(1)T or later.
One-port G.703 Multiflex Trunk
VWIC-2MFT-G703
2
Dual-port G.703 Multiflex Trunk
WIC-1DSU-T1 T1/Fractional T1 CSU/DSU (requires
Cisco IOS Version 11.3 [4] T or later)
WIC-1DSU-56K4 One-port four-wire 56/64 Kbps CSU/
DSU
WIC-1T One-port high speed serial
WIC-2T Dual-port high speed serial
WIC-2A/S Dual-port async/sync serial
WIC-1B-S/T One-port ISDN BRI
WIC-1B-U One-port ISDN BRI with NT1
WIC-1ADSL
3
3. Requires Cisco IOS 12.1(5)YB, 12.2(2)XK, 12.2(4)T or later.
One-port ADSL interface
WIC-1SHDSL
4
4. Requires Cisco IOS 12.2(4)XL or later.
One-port G.shdsl interface
WIC-1AM
5
5. Requires Cisco IOS 12.2(2)XB or later.
One-port analog modem
WIC-2AM
5
Two-port analog modem
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios