Compartible Systems Corporation RISC 2600i Manual de usuario descargar pdf (Pagina 8)

Cisco Systems, Inc.

Page 8 of 10

Advanced Integration Module Options

All Cisco 2600 models are equipped with an internal

slot to support one field-installable AIM. AIMs use

function-specific hardware to off-load the main router

CPU and accelerate processor- or resource-intensive

services, yielding dramatically higher throughput and

higher performance than a software-only implementation.

The AIM slot has access to virtually all of the router’s

resources, including the main system bus. TDM bus and

the serial communications controllers making it a very

flexible and powerful feature. Since the AIM is internally

mounted, external slots remain available for integration of

other modular components such as CSU/DSUs, WAN

interfaces, or other devices such as modems, or packetized

voice/fax processors.

The Data Compression AIM provides a cost-effective

optionfor reducing recurring WAN costs and maximizes

the benefit of the advanced bandwidth management

features of the Cisco IOS software. With compression

ratios of up to 4:1, the Data Compression AIM supports

8Mbps of compressed data throughput without

imposing additional traffic latency—enough to keep two

T1 or E1 circuits full of compressed data in both

directions simultaneously. The Data Compression

AIM supports industry standard LZS and Microsoft

Point-to-Point Compression (MPPC) algorithms and

ensurescompatibility with all Cisco productssupporting

hardware- or software-based compression.

TheData Encryption AIMofﬂoads encryption processing

from the Cisco 2600 Series CPU, providing 10 times

the performance over software-only encryption. The

AIM-VPN/BP supports a maximum number of 300

remote access tunnels, while the new AIM-VPN/EP

provides support for a maximum number of 800 remote

access tunnels. The AIM-VPN/EP is designed to take

advantage of the performance power of the Cisco 265x

Series and is recommended with this series only.

ThenewAIM-ATMmodule providesahigh-performance

hardware-based ATM access solution for one to four T1

or E1 connections supported bythe T1 or E1 VWICs (for

example, VWIC-IMFT-T1). This frees the network

module slot to support other functions. When used in

combination with a high density voice network module

(NM-HDV-xxx), the ATM AIM supports ATM adaption

layer (AAL) 2 and AAL5 VoATM.

Table 5 AIM for the Cisco 2600 Series

Alarm Interface Controller Network Module

The Alarm Interface Controller (AIC) is a network module

that greatly expands the network monitoring and control

capabilities of the Cisco 2600 and 3600 Series routers. The

AIC functions as an integrated entity residing within the

Cisco 2600 Router to provide network alarm monitoring

and remote control of network elements. The AIC reduces

service provider and enterprise operating expenses by

facilitating a single “box,” doing away with the need for a

dedicated external alarm monitoring device. This greatly

simplifies network layout, monitoring, and control

resulting in lower operations, administration,

maintenance, and provisioning (OAM&P) costs. The AIC

is supported in Cisco IOS 12.2 (2) XG and 12.2(7)T. The

AIC network module supports64 discrete alarm inputs, of

which 8 of the last 64 alarm points are

software-configurable to accept either analog or discrete

inputs. The AIC further supports 16 control relays to

facilitate the remote control of network elements.

Table 6 Alarm Interface Controller Network Module

Module Description

AIM-COMPR2 Data Compression AIM for the Cisco

2600 Series (requires IOS software

release 12.02T or later)

AIM-VPN/BP DES/3DES VPN Encryption Module

for the Cisco 2600—Base

Performance (requires IOS software

release 12.1(3)XI or later)

AIM-VPN/EP

1. Recommended with the Cisco 265x only.

DES/3DES VPN Encryption Module

for the Cisco 2600—Enhanced

Performance (requires IOS software

release 12.2(2)T or later)

AIM-ATM High Performance ATM AIM (requires

Cisco IOS software release12.2(2)XA,

12.2(4) T or later)

Module Description Cisco IOS Version

NM-AIC-64 Alarm monitoring and

control network module;

64 contact points and 16

control points

12.2(2)XG and 12.2(7)T

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Compartible Systems Corporation RISC 2600i Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Compartible Systems Corporation RISC 2600i